TDE-100 CLIP/CLIR SIP Set-up

[rchorowitz]

I have a TDE-100 using SIP trunks with ESI Hosted Services, LLC (by Vintalk).

We are unable to set up CLIP to block outbound CID.

We have tried both Preferred Identify Type and SIP-URI and played with every set-up combination we could think of.

We can block the name, but not the number. The switch vendor insists its a Panasonic setting.

Any ideas?



When activated on a CO the switch receives:

Received Packet from xx.xx.xxx.xx:35060
INVITE sip:1234567894@XXXXXXX SIP/2.0
Via: SIP/2.0/UDP xx.xx.xxx.xx0:35060;branch=z9hG4bK0000332a;rport
Max-Forwards: 70
To: sip:1NNNxxxxxxx@XXXX
From: "Anonymous" <sip:{masked@xxx.xom} >;tag=1272
Call-ID: 00003aa1-c2f67bde324f100083f90080f0b8164c@xx.xx.xxx.xx
CSeq: 1 INVITE
Contact: sip:1000@xx.xx.xxx.xx:35060
P-Preferred-Identity: "Anonymous" <sip:xxxx@xxxx>
P-Asserted-Identity: "Anonymous" <sip:xxxx@xxxx>
Privacy: none
Supported: timer,100rel
Session-Expires: 1800
Allow: INVITE,ACK,CANCEL,BYE,PRACK,OPTIONS,REGISTER,INFO,UPDATE
Content-Type: application/sdp
User-Agent: Panasonic-MPR07-V4.2003/VSIPGW-V2.3001
Content-Length: 266