TDA forced outgoing line

[mkrve]

I have a few isdn lines connected to my TDA.

I want some extensions to always dial over a surtan line without selecting the trunk group with 801, 802, etc..

for example:
when extension 201 dials a 0 for a outgoing line it should use ISDN line 1
when extension 212 dials a 0 for a outgoing line it should use ISDN line 2

Now we can do this by dialing 801 or 802 in stead of the 0.

Is it possible to force some extension over a preferd line?

Martin

 

[rivet]

if you have the software you can assigne each user to a class of service
then set the class of service to only have outgoing access to the trunk group of groups you want'its v/easy stuff with the software


peter