TDA 100 Call Forward to CO (in order to listen the dial tone)

[interfolo]

I have a KX-TDA100 with 4BRI configured as S0 (extensions), a SLC8 with BCA phones and a LCOT8 as CO. I need to configure my system so every call received by a BCA (e.g. extension 101) is forwarded to a LCOT line (e.g. 802). In my intention when someone (extension or CO) call 101 he has to ear the dial tone and then he could make an external call.

I tried configuring from the consolle

Call from Extension—FWD Status Availability ON
Call from Extension—FWD Mode ALL
Call from Extension—FWD Destination 802

But nothing happens...

If I forward ALL to another extension all works well.

Someone could help me please?

Thanks

 

[rivet]

what you want to do is normaly done with a voicemail or disa card.
i havnt tried this yet but you could set up a spare ext to to forward all calls to 9 (ie *71029#)
you will also have to allow forward to co in class of service settings.
but to be truthful i dont think so


if above doesnt work dont forget to cancle (*7100 )

peter (

http://www.vpi.ie)