Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TCP SIP trunk on BCM 400

Status
Not open for further replies.

pasesanchez

Technical User
Jun 17, 2008
21
BR
Hi,

I am trying to establish a trunk between a SIP proxy and a BCM 400 (v 4.0) using TCP, I have configured the BCM 400 and also the SIP proxy. When the proxy sends the SYNC to establish the TCP connection the BCM rejects the handshake by sending a RST.
Do you know if it could be a configuration issue ? or may be it isn't possible to establish TCP SIP trunks, BTW, if I set the SIP trunk to UDP (just that change) it works, but i need to use TCP.
Do you have some tutorial I can follow to configure the trunk ?

Regards.-
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top