Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TCP Port inside definity.ini (IPAgent)

Status
Not open for further replies.
osonegro

osonegro

IS-IT--Management
Oct 31, 2006
26
MX
Hello All

I need to get information about the definity.ini file, in the file is a parameter (tcp port) I need to know if this is a local port (Computer) or know if this is the remote port that the application will use to get connectivity to the CLAN card.

Please if you have any pdf file where I can check this information, I will appreciate it.

Thanks a lot for your help on this.
Best regards.
 
Status
Not open for further replies.

Similar threads

Turtlepuke
  • Locked
  • Question
One X Agent (Does changing to an AUX code use a specific port?)
Replies
0
Views
303
Turtlepuke
Turtlepuke
Samfiller
  • Locked
  • Question
Avaya Definity Platform Port Pin outs
Replies
3
Views
343
AvayaTier3
AvayaTier3
ITHawkDriver
  • Locked
  • Question
G450 Services port lit up, but not responding
Replies
4
Views
739
ITHawkDriver
ITHawkDriver
Tre0307
  • Locked
  • Question
How many Port Networks here?
Replies
2
Views
318
dialtonebone
dialtonebone
Richard_Harrow
  • Locked
  • Question
How do I know which port is which in a G650 Media Gateway cabinet?
Replies
4
Views
553
AvayaTier3
AvayaTier3

Part and Inventory Search

Sponsor

Back
Top