tcp/ip gateway default remove

[Parmb]

Hi,

the prob is a pc wont ping any other terminals it just times out. it can be pinged by another terminal - so i checked the ip settingsusing 'winipcfg' - 4 some reason it shows that theres default gateway at the same address as the pc. On other PC on the network the default gate = n/a

when i look at the network settings and the TCP/IP details of the network card - it shows no gateways??

how can i remove this default gateway - i tried to remove thet whole protocal an try aging but no go.

any help appreciated. PArm

 

[chuxxx]

What OS's are installed on the computers in question?
Are you using DHCP or Static IP addresses?
Are you saying that one computer has a gateway address and the other does not? The one that can not ping does not have the Gateway IP address?

Chuxxx

 

[Parmb]

ok, Im on a novell Netware Network with Win 98 workstations.

THe IPs are set manually, so static - there is no gatway on the network - hence other pc's which show no default gate work perfectly.

however, one pc keeps defaulting a gate on the same IP as i specified for it's IP address. Non of the other pc's do this - teh gateway is not visible under tcp/ip for the NIC - but shows up when i check in winiscfg.

i can ping the station from another station it's fine - but th eone with the default gate won't ping out.

i tried 2 remove the nic & the tcp/ip protocal an come againg - but no luck.
any help pls.