Target line to two ports and ringing busy if both in use

[togatown]

Hi all,

Scenario:

Inbound PRI
Received 1895
Target Line 219
Set 304

This was for my fax and the Target Line use to ring busy when in use. Now the customer wants to add a second fax (Set 303) and have the line ring to it when 304 is busy.

Easy enough, set the target line not to send a busy tone, clear the prime set and set 304 to forward to 303 when busy.

BUT...........304 forwards on busy, 303 answers, now both are busy. Another fax dials in and the line rings. How do I set this up so that it is busy?

TIA

Toga

 

[sprucegrover]

Try setting STN303 with only 1 intercom, and set DND on busy to YES. A third call should now return a busy signal