tapi

[felon]

Does anyone know how I can get the MCA on my 2616 set to work?

 

[chaosnla]

did you programm the second tn of this set...?

0 = 16
1 = 17
2 = 18
3 = 19

get it. loop shelf card unit ..and data unit.

tell me more. tell me more

 

[felon]

I am not even that far. Where do I start? PLease, you - tell me more, Tell me more please please please please....................

Ge the picture )

 

[chaosnla]

k, put the darn thing into the 2616 get some powr from a powr board or pick the correct phone that needs no powr .
when you put this in please be crful not to drive any screws
into, or through the ribbon cable inside. once you have powr. and the board placed inside. you ll need to programm the associated data tn, what tn is your phone on that needs to have the mca. tell me when you get this far.

 

[felon]

Ok. Done.

I heard there were pwr supplies for these, but I did not get a pwr supply with the unit nor can I find where it would plug in if I had one.

 

[chaosnla]

when you find a pwr sup. you'll wire it to the white green pair. or the 3rd pr of the staion cable. make sure you are using a 6 conductor line cord. you can wire this pwr sup at the jack or mdf/idf

24vlts ps