I'm looking for information on how to loopback a TAPI interface between a PC and a Siemens Optiset phone. I need to remove the phone from service, but the directory application on the PC will not start unless it sees the phone. I tried using a standard RS 232 loopback on the serial port of the PC but the directory application seems to need to see the phone before it will start.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TAPI loopback
- Thread starter rick2u
- Start date
obtsystems
Programmer
what system is it on. you will need callbridge software amd a usb interface or a adaptor to connect to phone
And how is the setup, 1 pc > 1 phone or 1 server > all phones?
For the last options you'll need to setup a HG1500 card.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
For the last options you'll need to setup a HG1500 card.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
- Status
