I'm not sure if I have a tapedrive or software problem. Whenever we run a local backup, we get about 10GB on the tape and then BackupExec spans tapes prematurely. The app also spits out this error:
TapeAlert!
WARNING: The tape drive is having problems writing data.
No data has been lost, but there has been a reduction
in the capacity of the tape.
Environment:
Compaq Proliant ML350
Compaq 40/80 DLT Drive
Novell NetWare 5.1 w/SP3
Backup Exec 8.5 Rev.4106
Any suggestions?
This is a remote server in an office with no technical staff.
TapeAlert!
WARNING: The tape drive is having problems writing data.
No data has been lost, but there has been a reduction
in the capacity of the tape.
Environment:
Compaq Proliant ML350
Compaq 40/80 DLT Drive
Novell NetWare 5.1 w/SP3
Backup Exec 8.5 Rev.4106
Any suggestions?
This is a remote server in an office with no technical staff.