Tape Drive for call pilot 1

[M1north]

1. Will an SLR4 tape drive work with Call Pilot?

2. Which SCSI port does the cable need to be plugged into?

I have been searching Nortel documentation for an hour and cant seem to find this info. I wish these books were written so you can find something a littel easier.

 

[strmwalker]

M1north...slr4 drive is for mermail and will not work
for a backup on callpilot you will need a slr5 drive or
a slr75 drive with new and much faster for backups.
the cables will go in this order using a cd drive with
a tape drive the scsi goes from the server to the the
bottom plug on the cd drive the top plug on the cd drive goes to the bottom plug on the tape drive most tape drives
are self terminating but if not put a terminator on the top
plug of the tape drive.if only using a tape drive scsi from
the server to the bottom plug on the tape drive the termination is the same as the cd to tape drive.

no problems only solutions

strmwalker

 

[M1north]

OK thanks, so the SLR4 will NOT work with a call-pilot?

 

[strmwalker]

M1north.. no it will not sorry.

no problems only solutions

strmwalker