Tandem Networking Calls

[gregarican]

I have had a tandem networking setup in place for about 4 years now. Outside calls come into the main site's Merlin Legend PBX through ISDN PRI. If the calls are destined for the remote site's Merlin Magix PBX they are passed along a point to point T1.

My question is that now I wish to collect the caller ID's for a CTI application I developed. This works fine for outside calls coming directly into the main site. But outside calls piped over to the remote site show up with the trunk name/number, not the caller ID.

Is there a feature that I can enable that can pass along the caller ID to the remote site? Otherwise I will need to collect it at the TServer somehow and pass it along other ways.

 

[Pepperz]

Is the point to point cofigured as PRI?

Pepperzgm at gmail dotte comm

 

[gregarican]

Yes it is.

 

[gregarican]

Sorry. Forgot the caller ID is carried over since I use PRI. You can tell it's been awhile since I've checked out my remote site .

 

[Pepperz]

So, you're good ?

Pepperzgm at gmail dotte comm

 

[gregarican]

Yep. If I want to leverage the CTI stuff I suppose I'll have to install a TServer at the remote site as well. That should take care of it. Thanks for your help!

 

[Pepperz]

Saarite

Pepperzgm at gmail dotte comm