Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tandem calls to CS1K through SIP

Status
Not open for further replies.

bluemr2

Vendor
Sep 5, 2006
819
US
I have a bcm450 connected to a CS1K via SIP. I have the BCM set to use a private proxy and can make and receive calls dialing 4 digits. My problem is trying to tandem the calls through the CS1K. In my route, I need to set the call type as private to make it work.(I'm assuming this is so it uses the private proxy, and not the public.) Setting the route to private though, only allows me to dial 4 digits. (the length of the private received digits). If I set it as public, I can dial the whole number, but the call fails. Help! Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top