Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tadiran programming 1
- Thread starter Phantom7
- Start date
Phoneguy69
Technical User
I believeyou can access via hyperterm. there should be a connection on the processor you can hook to
that serial port will talk at 8 none 1 at 1200 on procom or dyperterm.. return return 0000 was a usable log in, after that i hope it came with a book... do they still make those? i have one in the basement we used for wireless until we brought the cisco up but haven't been in the program mode for a decade
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
Connect to the KB0 (serial port) on the front of the processor. Use hyperterminal - connect at 9600, N, 8,1.
Press enter - default password is MCENTER.
Everything else is menu driven.
To change system time, enter "time" from almost any point in the menus
Name changes - command is PLIS, then update and the extn number...
Good Luck
Press enter - default password is MCENTER.
Everything else is menu driven.
To change system time, enter "time" from almost any point in the menus
Name changes - command is PLIS, then update and the extn number...
Good Luck
- Thread starter
- #5
disturbedone
Vendor
Hi Phantom7, what country are you in? If UK, drop me a line.
disturbedone
Vendor
Hi Phantom7, what country are you in? If UK, drop me a line. I work on Tadiran's in the UK.
Cheers
Cheers
-
1
- #8
metballnut
Vendor
Well, I don't know about the whole MCENTER as the default. That is not the default.
You will need to use the password to sign in. Here is a cheat sheet of the most popular shortcuts.
FYI, I teach a class on this. Use Procomm. Always display before updating.
Never hit ERASE in the NPL or the Offset Filters.
SIGN IN-
FROM "ENTER PASSWORD" PUT IN your password
HIT ENTER
SIGN OUT- HIT CONTROL P AT ANY TIME
NAME CHANGE-
TYPE "PLIS" FROM ANY LOCATION -ENTER
CHOOSE 1-DIAL_NUM
CHOOSE 0-UPDATE
CHOOSE 2-KEYSET
ENTER EXTENSION #
kEEP HITTING ENTER UNTIL YOU REACH "FULL(16)-"
ENTER NAME, USE UNDERSCORE FOR SPACE BETWEEN CHARACTERS, PRESS ENTER
TO REMOVE NAME JUST TYPE "R" THEN HIT ENTER
BUTTON CHANGE
TYPE "PROG" FROM ANY LOCATION
CHOOSE 0-UPDATE
ENTER EXTENSION #
KEEP HITTING ENTER UNTIL YOU REACH BUTTON 0
ENTER CODE, EXTENSION NUMBER OR SPEED DIAL
PRESS ENTER.
FOR SPEED DIAL PUT 9 AND A SPACE BEFORE NUMBER....9 3375551212
BUTTONS ON PHONE START FROM THE LOWER RIGHT CORNER WITH BUTTON "0" THEN COUNT UP THE COLUMN
THE WELL START AT THE COLUMN TO THE LEFT AT THE BOTTOM (ONLY THE LARGER PHONES)
THE "HOLD, SPKR, XFER CONF, AND MIC" BUTTONS CAN'T BE CHANGED
SPEED DIALS SYSTEM AND PRIVATE
SYSTEM-
TYPE "LIB" FROM ANY LOCATION
CHOOSE 0-PUB.LIB
CHOOSE 0-UPDATE
PICK INDIVIDUAL LIBRARY OR RANGE OF LIBRARIES YOU WANT TO PROGRAM
YOUR RANGE IS i the number plan - default is 6000-6999
AFTER PICKING THE LIBRARY NUMBER HIT ENTER UNTIL YOU SEE FULL(16)- BLANK.
HERE, YOU CAN PUT A NAME ON THE SPEED DIAL, REMEMBER TO USE UNDER SCORE FOR SPACE
THEN TYPE "N" ENTER "N" ENTER "N"ENTER "0" ENTER THE PHONE NUMBER ENTER 9 ENTER
PRIVATE-
TYPE LIB FROM ANY LOCATION
CHOOSE 1-PRIV.LIB
CHOOSE 0- UPDATE
CHOOSE EXTENSION HIT ENTER TWICE
CHOOSE LIBRARY 7000-7009 (default)
HIT ENTER UNTIL YOU SEE "ENTER DIAL NUM-"
PUT IN PHONE NUMBER HIT ENTER
PUT IN "9" HIT ENTER
TIME
TYPE TIME FROM ANY LOCATION
ENTER TIME
AM/PM
DATE
UPDATE "
SWAP PHONES (available on versions v14
You need to set up the NPL to do this.
#17720
THE EXTENSION # YOU WANT TO SWAP WITH
Password - example 4 ZEROS "0000" The password is set up in keyset def.
#11
vpz-page groups
type vpz
0-update
enter group number
update members
did's from main directory
0 0 7
0
1
add or remove
enter did #, enter
enter did again
enter destination
control b to back up one line
control u to back up one program
control w to stop the scroll
You will need to use the password to sign in. Here is a cheat sheet of the most popular shortcuts.
FYI, I teach a class on this. Use Procomm. Always display before updating.
Never hit ERASE in the NPL or the Offset Filters.
SIGN IN-
FROM "ENTER PASSWORD" PUT IN your password
HIT ENTER
SIGN OUT- HIT CONTROL P AT ANY TIME
NAME CHANGE-
TYPE "PLIS" FROM ANY LOCATION -ENTER
CHOOSE 1-DIAL_NUM
CHOOSE 0-UPDATE
CHOOSE 2-KEYSET
ENTER EXTENSION #
kEEP HITTING ENTER UNTIL YOU REACH "FULL(16)-"
ENTER NAME, USE UNDERSCORE FOR SPACE BETWEEN CHARACTERS, PRESS ENTER
TO REMOVE NAME JUST TYPE "R" THEN HIT ENTER
BUTTON CHANGE
TYPE "PROG" FROM ANY LOCATION
CHOOSE 0-UPDATE
ENTER EXTENSION #
KEEP HITTING ENTER UNTIL YOU REACH BUTTON 0
ENTER CODE, EXTENSION NUMBER OR SPEED DIAL
PRESS ENTER.
FOR SPEED DIAL PUT 9 AND A SPACE BEFORE NUMBER....9 3375551212
BUTTONS ON PHONE START FROM THE LOWER RIGHT CORNER WITH BUTTON "0" THEN COUNT UP THE COLUMN
THE WELL START AT THE COLUMN TO THE LEFT AT THE BOTTOM (ONLY THE LARGER PHONES)
THE "HOLD, SPKR, XFER CONF, AND MIC" BUTTONS CAN'T BE CHANGED
SPEED DIALS SYSTEM AND PRIVATE
SYSTEM-
TYPE "LIB" FROM ANY LOCATION
CHOOSE 0-PUB.LIB
CHOOSE 0-UPDATE
PICK INDIVIDUAL LIBRARY OR RANGE OF LIBRARIES YOU WANT TO PROGRAM
YOUR RANGE IS i the number plan - default is 6000-6999
AFTER PICKING THE LIBRARY NUMBER HIT ENTER UNTIL YOU SEE FULL(16)- BLANK.
HERE, YOU CAN PUT A NAME ON THE SPEED DIAL, REMEMBER TO USE UNDER SCORE FOR SPACE
THEN TYPE "N" ENTER "N" ENTER "N"ENTER "0" ENTER THE PHONE NUMBER ENTER 9 ENTER
PRIVATE-
TYPE LIB FROM ANY LOCATION
CHOOSE 1-PRIV.LIB
CHOOSE 0- UPDATE
CHOOSE EXTENSION HIT ENTER TWICE
CHOOSE LIBRARY 7000-7009 (default)
HIT ENTER UNTIL YOU SEE "ENTER DIAL NUM-"
PUT IN PHONE NUMBER HIT ENTER
PUT IN "9" HIT ENTER
TIME
TYPE TIME FROM ANY LOCATION
ENTER TIME
AM/PM
DATE
UPDATE "
SWAP PHONES (available on versions v14
You need to set up the NPL to do this.
#17720
THE EXTENSION # YOU WANT TO SWAP WITH
Password - example 4 ZEROS "0000" The password is set up in keyset def.
#11
vpz-page groups
type vpz
0-update
enter group number
update members
did's from main directory
0 0 7
0
1
add or remove
enter did #, enter
enter did again
enter destination
control b to back up one line
control u to back up one program
control w to stop the scroll
disturbedone
Vendor
metballnut, that is the default level 2 password. There is also level 0,1 & 3 passwords. MCENTER stands for Maintenance Console ENTER. Any system anywhere in the world has that as the default, it can obviously be changed but that is what it is the first time thet system is turned on.
That is the level that most engineers use. Level 0 & 1 are used for customer programming eg a receptionist can change names, speed dials, time etc but that's about it. Level 3 is generally only for Tadiran to know but a lot of people know it as there are a lot of useful things that can be done in troubleshooting with that level.
That is the level that most engineers use. Level 0 & 1 are used for customer programming eg a receptionist can change names, speed dials, time etc but that's about it. Level 3 is generally only for Tadiran to know but a lot of people know it as there are a lot of useful things that can be done in troubleshooting with that level.
- Status
Similar threads
- Locked
- Question
