TACACS+ on two routers

[Flow21]

Hi

I want to run a TACACS+ Server on win2k as! There is a dialup connection between two isdn routers (Cisco 800). On the one end there is the internal network with the CiscoSecure Server on the other end there is an external PC.

Does this work?
I´ve heard rumours that TACACS+ between two routers is impossible.
Is this true?

Greets and thanks in advance.

Flow21

 

[wybnormal]

I do not dial up but I do have a terminal server sitting on the outside of a NATed network happily using TACACS+ to the Linux box on the inside of the NATed network. Is this what you are asking? can you run the TACACS+ protocol through a router to get to the server? if so, then yes, you can. It takes a static NAT mapping for it to work.. Also make sure that the accesslist on the inbound side allows the TACACS protocol.

! this maps the port 49, TACACS+ to Linux server running the deamon
!
ip nat inside source static tcp 192.168.5.3 49 192.168.8.2 49 extendable
!

MikeS
Find me at

http://www.packetattack.com

"The trouble with giving up civil rights is that you never get them back"