Tables disappear from data environment

[paulthibodaux]

I am using VFP6 and have built a form with several tables in the data environemt. The form is set to a private data session. From time to time when I run the form the tables will have been removed from the environment and must be readded. Does anyone have any idea why this is happening?

 

[Mike Gagnon]

paulthibodaux

I have seen this in the past. My experience has been that the form is corrupted. I would copy all the controls of your form onto a new form, and see if this behavior stops.

Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.

 

[paulthibodaux]

Thanks for the response. I have done this once and for a few days of developement it appeared to work but has now come back. This is a very complex form with a large number of custom methods, properties and controls. I had hoped for a less drastic solution.

 

[Mike Gagnon]

paulthibodaux

On a more dastric note, I would suggest if you can, to do a scandisk on your hard drive, there may be an error.

Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.