Hi experts. I have a T7406 that someone tried to move to another digital telephone set location but it wouldn't work. I'v moved it back to the original location and it still doesn't work. It has good signal strength and battery is charged. Any suggestions? Does it need some kind of reset? Many thanks!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T7406 on BCM3.5
- Thread starter Uraby
- Start date
SupportDude
Technical User
How did they move it?
The set connects to the base and the base connects to a digital port.
Which version of T7406 is it?
I would start troubleshooting at the basestation by disconnecting the cable from the digital port and plugging it into a digital set to see if the port is good or not.
-SD-
The set connects to the base and the base connects to a digital port.
Which version of T7406 is it?
I would start troubleshooting at the basestation by disconnecting the cable from the digital port and plugging it into a digital set to see if the port is good or not.
-SD-
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question