T7316E key programming

[qinta]

Thanks in advance...
We have a MICS 6.1+ and a slew of T7316E's.
1) If I program a button as an autodial key of x700 on the x710 phone, I can see if x700 is on the phone , but cannot see x700 ring to answer it.
2) I can set a x700 to app and/or ring on another programmable button of x710, but does not show that someone is on x700 if it was answered by another person.

My question is:
Can I have a single programmable button that "appears" (to answer if necessary) and also shows if someone is on that line? Basically x710 needs to see x700 ring and be able to see if someone is on that line at any given time.

-Qinta

 

[luv2ski]

need 2 ...answer button and autodial or if your only interested in inbound and have did service then drop the answer dn and us an appear/ring of target line

ONLY 7 WEEKS TILL SKI SEASON STARTS

 

[BagsNYC]

like luv2ski mentioned, the two functions you mentioned are completely different. Programming the autodial as your observe, the answer DN to actually answer the call.