T10000 IP address reset

[timwah]

Hi all,
I have some T10k drives off lease that need testing. I've installed the VOP, but the drives have had the IP address changed from 10.0.0.1 to ?????. Thought a quick push of the maintenance switch on the back of the drive is supposed to reset the IP to default, but still cannot connect to the drives with VOP (ping 10.0.0.1 also fails) Host is configured as 10.0.0.2
Anybody know what I'm doing wrong?

 

[mletendre]

I have done this a few times, does the light start blinking red/green?

 

[mletendre]

Did you set the subnet mask to 255.255.255.0

 

[timwah]

Hi mletendre,
thanks for the replies...
got my drives running. the above procedure does set the IP back to defaults. I had cable / host adapter problems.
Tim

 

[mletendre]

Ok good to know, We are always trying to buy/sell these drives and have had our own set of problems!