Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

T1 to the Internet

Status
Not open for further replies.

secureinc

Technical User
Feb 18, 2002
34
US
Question - What are the proper commands for a t1 to the Internet? I know the commands for a 256 are as follows, but what about a full t1 to the web?

interface Serial0
bandwidth 256
service-module t1 timeslots 1-4

Thank you very much!!!
 
interface Serial0
<bandwidth 256*>
service-module t1 timeslots 1-24

*The bandwidth statement is only used by some routing protocols as part of a metric to determine best paths and is also used by some Qos Functions. It has no bearing on how you physical line is clocked.

HTH,
Nick
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top