T1 SLP errors 1

[papagigo1]

This is not service effecting but it kind of bugs me to keep seeing it.
I have been monitoring a non PRI T1 for a few days. It is running clean except for a consistant SLP error 041.

Verizon T1 into a CSU to Magix 4.0

Any thoughts?

 

[SYQUEST]

What clocking option is being used? It should be primary clocking for that module and set to LOOP.

....JIM....

 

[papagigo1]

SYQUEST,

The system is 150 miles away and this is all I can capture via IP Socket Magix. Does this help at all?


DS1 SLOT ATTRIBUTES

Slot Type Format Supp Signal LineComp
6 T1 ESF B8ZS Rob_Bit 1

CSU/DSU ATTRIBUTES

Slot 6
CSU: Activated
Assigned Channels:
DSU: Deactivated
Data Port 1
Receive Clock: DTE
Invert Transmit Clock: No
Invert Receive Clock: No
Invert Transmit Data: No
Invert Receive Data: No
Rate: 56 kbps
Assigned Channels:
Data Port 2
Receive Clock: DTE
Invert Transmit Clock: No
Invert Receive Clock: No
Invert Transmit Data: No
Invert Receive Data: No
Rate: 56 kbps
Assigned Channel

 

[papagigo1]

The "clock slot 06 " Active, LOOP

 

[merlinman]

Printing SYSTEM SET UP will show the clocking in this format:

A T1/PRI/BRI Clock Synchronization:
A Primary Secondary Tertiary
A 9/1 Loop


That's what SYQUEST is looking for.

http://home.comcast.net/~merlinman

-merlinmansblog.blogspot.com

 

[papagigo1]

Thanks for that Jack,

This is one you designed for me in Massachusetts..

That SLP 041 is still there.

T1/PRI/BRI Clock Synchronization:
A Primary Secondary Tertiary
A 8/1 Loop 8/0 Local