T1 problem Legend

[thephonelady]

I am setting up a plain T1 for a customer. It is something called a LK1 from Verizon and I am having a problem- I have set it up as ESF/B8ZS Robbed bit. There are 23 channels (No it's not a PRI)
They are set for wink/wink toll- pretty basic. Verizon says they are not providing dial tone.
What is happening is that the circuit seems to be up but the amber in use light on the 100 D is always on and when I try to call out I get a fast busy. Of course Verizon sys their ckt is fine!! I will post a printout shortly.
Thanks in advance!!

 

[thephonelady]

Here is the printout-
----- Site: Direct. Captured: 4/7/2010 -----
TIE TRUNK INFORMATION



TRUNK 613 Slot/Port : 4/ 1 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 614 Slot/Port : 4/ 2 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 615 Slot/Port : 4/ 3 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 616 Slot/Port : 4/ 4 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 617 Slot/Port : 4/ 5 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 618 Slot/Port : 4/ 6 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 619 Slot/Port : 4/ 7 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 620 Slot/Port : 4/ 8 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 621 Slot/Port : 4/ 9 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 622 Slot/Port : 4/10 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 623 Slot/Port : 4/11 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms
TIE TRUNK INFORMATION



TRUNK 624 Slot/Port : 4/12 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 625 Slot/Port : 4/13 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 626 Slot/Port : 4/14 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 627 Slot/Port : 4/15 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 628 Slot/Port : 4/16 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 629 Slot/Port : 4/17 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 630 Slot/Port : 4/18 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 631 Slot/Port : 4/19 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 632 Slot/Port : 4/20 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 633 Slot/Port : 4/21 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 634 Slot/Port : 4/22 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms
TIE TRUNK INFORMATION



TRUNK 635 Slot/Port : 4/23 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Local
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms



----------------------------------- ANNOTATION -----------------------------------
and here is one from a client who has a T1 also and the only difference there is is that it is set for remote dialtone
----- Site: Bender Riverside. Captured: 04/07/10 -----
TIE TRUNK INFORMATION



TRUNK 809 Slot/Port : 4/ 1 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 810 Slot/Port : 4/ 2 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 811 Slot/Port : 4/ 3 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 812 Slot/Port : 4/ 4 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 813 Slot/Port : 4/ 5 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 814 Slot/Port : 4/ 6 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 815 Slot/Port : 4/ 7 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 816 Slot/Port : 4/ 8 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 817 Slot/Port : 4/ 9 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms

TRUNK 818 Slot/Port : 4/10 Toll
Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
InType : Wink InMode : TouchTone AnsSupvr : 300 ms
OutType : Wink OutMode : TouchTone Disconnect: 300 ms



----------------------------------- ANNOTATION -----------------------------------


Any thoughts??

 

[merlinman]

Check to see if you have any errors in the error log and clear them out.

That may or may not do it, but it's a place to start.

http://home.comcast.net/~merlinman

 

[dagwoodsystems]

I think what Jack might be referring to is the behavior when AutoBusyTie is set to Enable (do a print SYSTEM SETUP to see). With both T1 and PRI, I have occasionally needed to busy/release the individual trunks in addition to the whole blade when AutoBusyTie and/or AutoMaintBusy are enabled.

Tim Alberstein

http://www.dagwoodsystems.com