TheCardMan
IS-IT--Management
What should the framing be from the telco for a T1 to connect into a 2851 CME router? ESF/B8ZS?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T1 Framing - CME
- Thread starter TheCardMan
- Start date
- Status
VoIPGuyNSC
Technical User
Whatever they tell you <grin>! But seriously, just match your router to whatever they provision it as. In North America, T1s are generally, though certainly not always, provisioned as Extended SuperFrame with a B8ZS linecode.
John Lever
Telecommunications
Richland School District Two
John Lever
Telecommunications
Richland School District Two
- Thread starter
- #3
TheCardMan
IS-IT--Management
Thanks John. I figured that was it.
Now I just have to learn how to set this CME up!!
I have very limited router experience and the expectation is to get it to work the first time!
Now I just have to learn how to set this CME up!!
I have very limited router experience and the expectation is to get it to work the first time!
- Status