I have IP412 running 3.0(44). T1 to LD provider is set up as E&M wink routing digits=0. LD provider is not sending anything but 10 digit DNIS.I have verified this. On incoming call I see "routing digit received" on monitor trace and get 7 to 10 of the incoming DNIS digits followed by statement "incoming call received from (blank)to xxxxxxxx. The x's are all or part of the ten digit DNIS info. Is not affecting call handling since incoming call route is going to vmail AA. I am not comfortable seeing DNIS digits come in as routing digits and am wondering if you guys can shed some light on the situation for me. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T1 E&M and DNIS
- Thread starter htowndave
- Start date
Similar threads
- Locked
- Question