Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T1 channel division.
- Thread starter bsheikh
- Start date
PeterHurst
IS-IT--Management
T1 is effectively point-point so to connect two devices (assuming they're both T! would require two more T1 cards in the cisco and some fancy programming to achieve.
There are better drop and insert boxes available which allow splitting of a T1/E1 into two but these are generally designed to carry a data stream with voice.
It would probably make sense to have the FAX server and the cisco connected to the Nortel and let that do the routing as I assume you would be using DDI numbers to find the relavent devices.
There are better drop and insert boxes available which allow splitting of a T1/E1 into two but these are generally designed to carry a data stream with voice.
It would probably make sense to have the FAX server and the cisco connected to the Nortel and let that do the routing as I assume you would be using DDI numbers to find the relavent devices.
- Status
Similar threads
- Locked
- Question