Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

T1 Cable Extension Distance?

Status
Not open for further replies.

winger15

IS-IT--Management
Nov 25, 2005
7
US
Hello All,
I have to extend a T1 Circuit from the demarc room, out to an IDF wiring closet, approx. 400 feet away. I am thinking of using T1 Cable, 22 AWG, 2 pair shielded for the cable run, and terminating it in the IDF on a RJ48X jACK.
any comments would be appreciated.
Thanks
 
400 feet is within spec (with 655' the theoretical max) - and you're using the correct cable. May need to change the Xmit/Recv levels in CSU and Smartjack.

Mike
 
Consult the documentation for the CSU you are using for your installation for setting proper equalization of LBO and levels, and any other options required. That way you will have optimum performance, in addition to using the CORRECT cable!

....JIM....
 
Or have the Telco/Provider extend the dmarc. There will be a charge. But that puts the performance issues on them.

>****
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top