MaXJohnson
MIS
On an option 11c, is there ia way to display the real time status of T-1 channel signalling bits?
TIA
TIA
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T-1 signalling bits on DTI
- Thread starter MaXJohnson
- Start date
- Status
You can go to LD 60 and do LCNT to list a count of your presetted parameters such as frame slippages, bipolar violations, CRC checks, loss of frame. First, reset the counters with RCNT and then use LCNT to see speed in which the count changes. If the numbers add up quickly, suspect a faulty T-1, clock, or span from Bell.
- Status
Similar threads
- Locked
- Question
