System Speed Call List (SSC)

[fmielbye]

Not familier with the 3900 type phones. I'm trying to program an SSC on a 3903 and the only key it's working on is key 23. 23 is already assigned as the personal list(SCC) I can nul that and add the system but should'nt I be able to have both on these sets?

Thanks, Fred

 

[jamming1]

Key 23 is the soft key position on the M3903, 3904, and 3905, which can be used for personal or system speed call. I can't remember if it's both 3903 and 3904's or if it's just on the 3904's. There is a personal speed dial list built into the phone. So then you can use the soft key for the system speed call list.

On the 3903 you can program a system or personal speed call key on key's 0 thru 3.

Or you can make a flexible feature code. Then the users can dial a number like #0 then the speed call list entry number.

 

[PERRYPJ]

M3903 Key Description
KEY 0 Primary DN

KEY 1-3 Secondary DN or Feature or Auto-Dial Note: Key 1-3 do not configure:AO3 CPN RNP AO6 PRK CFW PRS MWK CHG


KEY 4-15 Not Supported

KEY 16 Message Waiting is not a default feature key. Must use Message Waiting DN

KEY 17 Call Transfer key (TRN)
KEY 18 (AO6)/AO3 (Default 6 party)
KEY 19 Call Forward (CFW)
KEY 20 Ring Again (RGA)
KEY 21 Call park (PRK)
KEY 22 Ringing Number Pickup (RNP)
KEY 23 SCU or SU or SCC or SSC note: manual configuration- needs speed call list number
KEY 24 Privacy Release
KEY 25 Charge Account
KEY 26 Calling Party Number
note: Call Forward defaults to 16 digits
note: Features not listed on keys 16-26 MUST be programmed on Keys 1-3. Key 0 is for primary DN


OLD ROLMEN WORKING ON NORTELS