System printer setup for S8700 3

[carlsontech]

Need instructions on System printer setup for S8710 PBX. Printer will be used for BCMS reports. Printer is connected through 4610 phone. Any help is appreciated.

 

[4merAvaya]

On the 'node-name ip' form add an entry 'printer' with the IP address of the printer.

On the 'IP Services' form add an entry 'SYS_PRNT' in the Service Type column, the node-name of the C-LAN board that you will use in the Local Node column, Local Port = 0, Remote Node = 'printer', and the Remote Port is 9100.

On page 4 of the Systems Features form enter 'SYS_PRNT' in the System Printer Endpoint field.

Kevin

 

[carlsontech]

Thanks the setup worked great. How can I go about testing this remotely? I would like to print out a report or something to test?

 

[4merAvaya]

'list station schedule' <RETURN> <ENTER>.

Kevin

 

[84Mike]

What about font size? I have just set up the printer on my switch, but the output is tiny. Should I try different printer?

 

[mikeydidit]

I tried the above setup and when I do a " disp sta xxxxx pr" I get the message "printer failed." Any ideas on what I am doing wrong?? Thanks



Mikey

 

[4merAvaya]

'pr' sends it to the SAT printer. 'schedule' sends it to the system printer.

Kevin

 

[mikeydidit]

I hate to admit that something so easy has given me problems for so long, but you now have me printing Kevin..

Thanks for your help.



Mikey