Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
system down
- Thread starter batm
- Start date
The code indicates a bad DSU in mag 3.......that doesn't necessarily mean that you don't have a bad LSU.
Check the cable from LSU/DSU and the outputs on the power boards first. Then, if it were me, I'd either disconnect the DSU in mag3 and try to load the switch again, or I'd pull all the device boards (except LSU) in mag3 and try a load.
What event caused the LIM to drop in the first place?
Good luck,
Dave Strang
Check the cable from LSU/DSU and the outputs on the power boards first. Then, if it were me, I'd either disconnect the DSU in mag3 and try to load the switch again, or I'd pull all the device boards (except LSU) in mag3 and try a load.
What event caused the LIM to drop in the first place?
Good luck,
Dave Strang
- Status
Similar threads
- Locked
- Question