Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
system coordinator pasword ? 1
- Thread starter top3
- Start date
-
1
- #2
jerryreeve
Vendor
the system coordinator password is reset under Passwords->Progrming pswds->sysCoord
Note this is not the SysCoord+ it is the next item on the list.
Step By Step
Feature * * 2 6 6 3 4 4
Password 2 6 6 3 4 4
next 4 times until you see passwords on the display
Show 1 time
Next 2 times to programming passwords
show 1 time
next 2 times to Sys admin
press change
enter 6 digit number
press ok
Interesting thing is that the book says that this is SYSCOORD but in programming it shows up as SYS Admin?
I have ver 4.1 is this the same on other versions?
JerryReeve
Communications Systems Int'l
com-sys.com
Note this is not the SysCoord+ it is the next item on the list.
Step By Step
Feature * * 2 6 6 3 4 4
Password 2 6 6 3 4 4
next 4 times until you see passwords on the display
Show 1 time
Next 2 times to programming passwords
show 1 time
next 2 times to Sys admin
press change
enter 6 digit number
press ok
Interesting thing is that the book says that this is SYSCOORD but in programming it shows up as SYS Admin?
I have ver 4.1 is this the same on other versions?
JerryReeve
Communications Systems Int'l
com-sys.com
curlycord
Programmer
Yes the book is the system co-ordinator guide but it tells you how to get into admin programming....older software (DR5) says Admin. password.
If the above does not work then you have older software so do the following:
Feature * * 2 6 6 3 4 4
Password 2 6 6 3 4 4
Press next
Press show
press next 6 times
press show
press change on screen and enter new password.
If 266344 did not let you into programming then you need to call a tech who might know how to crack it or he/she will call Nortel for you to have it debugged with a written letter of consent from customer.
If the above does not work then you have older software so do the following:
Feature * * 2 6 6 3 4 4
Password 2 6 6 3 4 4
Press next
Press show
press next 6 times
press show
press change on screen and enter new password.
If 266344 did not let you into programming then you need to call a tech who might know how to crack it or he/she will call Nortel for you to have it debugged with a written letter of consent from customer.
- Status
Similar threads
- Locked
- Question