Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

System Alarm question

Status
Not open for further replies.

Kibbs308

Technical User
Jun 28, 2011
61
US
All of a sudden I am getting this system alarm sent to me from a client.

IP Office 500V2 11.0 software

System Alarm:
CP:1/10.23% ME:71663/19542 AL:11/0 VC:42/0 DC:48/0 VM:4/0 CC:128/0/0 N(1/R:2901/T:7085)N E(57/54 S:7/7 H:40/40 P:10/7)E VR:11.0.4.8.0(17)

From the looks of it the line is stats with CP=CPU utilization ME=Memory AL=? VC=VCM DC=Data Connections VM=Voicemail channels and CC=Conference. What I don't know is why after 6 years all of a sudden I am getting this sent to me about 500 time a day, with no consistency at all.

Any guesses as to why or possible was to stop it? First I thought maybe I clicked on something in the Monitor I am running so I set it to defaults. This also is only emailed to me it does not show in the SSA at all.

 
Check in the System - System Events - Alarms programming of the IPO to see what is setup in there and if it bugs you turn it off. If there are no problems with the system then it might just be a bug that is resolved with a reboot.

Joe
FHandw, ACSS, ACIS

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top