Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SYSLOAD ?
- Thread starter harris215
- Start date
Firebird Scrambler
Systems Engineer
The question is why do you want to do a sysload?. It would only be done if you had corruption, or were updating some patches that needed a sysload.
I would never advise a sysload, unless I had no other option. A warm start would be the preferred choice.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
I would never advise a sysload, unless I had no other option. A warm start would be the preferred choice.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
One way to think of it is "How often do you have to pull the battery from your cell phone to reset it". The answer is similar: Only when it stops working.
However, you might want to prove that your system is "able" to recover from an unexpected power cycle, and a Sysload is a good way to prove that.
--
Nortel Resources at GHTROUT.com
--
However, you might want to prove that your system is "able" to recover from an unexpected power cycle, and a Sysload is a good way to prove that.
--
Nortel Resources at GHTROUT.com
--
- Status
Similar threads
