sysbkp password in hipath 4000

[amir00770]

HI.
I use hipath 4000 version 6,the duplex one.
I changed sysbkp password and then I faced some warning and error messages on the very first page on assistant.Some days later,I started for checking updates for linux so that I lost my connection with assistant(192.0.2.3).after a while,when i tried to connect to 192.0.2.3 I was redired to the installation page of assistant.I could saw a page defining the status of different requirements of installation.they were all ok except RMX.I downloaded the log files which are inserted below:


------------------------------------------------------------install_assistant.20150302092847.log----------------------------------------------------------------
Started Mon Mar 2 09:28:47 CET 2015

No update for ASrppm
Current ASrppm-06.200-0069

No update for ASinst
Current ASinst-06.200-0058

Last status: Installation is not running and Assistant is not installed
Potential Installation
OS counter: 0
Manual reinstallation requested. Ignoring counters ...
AS counter: 0
Manual reinstallation requested. Ignoring counters ...
Another OS upgrade possible
[ start_os_update ] Starting OS update
[ start_os_update ] ------------------------------------------------------------------
[ start_os_update ] Collecting OS updates from /.AS/BACKUP/Assistant_instpart/os ...
[ start_os_update ] Creating job file (/var/tmp/os_update.job)
[ start_os_update ] Reading /var/tmp/os_update.job to get the list of OS updates...
[ start_os_update ] Final OS update report:
[ start_os_update ] PID:3741
[ start_os_update ] PROC_NAME:/usr/bin/perl /opt/siemens/HP4K/rppm/bin/start_os_update
[ start_os_update ]



[ start_os_update ] No update needed...

[ start_os_update ] Exiting...
OS upgrade status: No OS update

Checking RMX ...

------------------------------------------------------------------disp-signl.log-------------------------------------------------------------------------


spawn telnet 192.0.2.3
Trying 192.0.2.3...

Connected to 192.0.2.3.

Escape character is '^]'.


LOGIN = SYSBKP^MPASSW = ********
LOGIN INVALID[highlight #FCE94F][/highlight]

LOGIN = cha-funct:slang=eng;^MPASSW = ******************
LOGIN INVALID

LOGIN =

-------------------------------------------------------------------------------------------------------------------------------------------



I guess it is related to the modification of sysbkp password.maybe I need to return it to the default one.would you please help me in this regard?
does anybody know the default password for sysbkp?

 

[sbcsu]

'skybkb' is your own company username/password, such a username/password does not exist by default on the HiPath.

There are at least 2 locations that you are mentioning
Firstly on Comwin you have to ADD-USER:SKYBKB etc. and give it a password
Secondly on the Assistant at 192.0.2.5 you normally log on using engr then setup a new user, in your case skybkb and give that user a password.

 

[amir00770]

hi.
thanks for your response.
the axact name of the user is sysbkp not skybkp.as i understood it is used for backing up the system.do you know anything about it?

 

[sbcsu]

Hi,
My apologies - I was incorrect.
Today I spotted it on a V6
SYSBKP is a user on Comwin by default.
It is 'erasable' however.
Try logging in as ROOT
PASSWD:SYSBKP;
Then you should be able to change the password of SYSBKP
Regards

 

[donb01]

If I had to guess at what the password WAS, my first guess would be Siemens2000

 

[amir00770]

Hi ,
I solved the problem myself.
the sysbkp pass was _W30e9-m.