Synch error on 2-Lim W.O GS

[consultwus]

I'm getting the following synch error on a BC12 SP8 system configured for 2-Lim without Group Switch:

<SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 1-0-40-0 INTERNAL SYNC ERROR
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT

END

<GJLSPRINT=ALL;
GROUP JUNCTOR LINE STATUS
EQU = 1-0-00-0 GS-MULT 0-0
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 2-0-00-0 GS-MULT 0-2
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 1-0-20-0 GS-MULT 0-4
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 2-0-20-0 GS-MULT 0-6
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 1-1-00-0 GS-MULT 0-8
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 1-2-00-0 GS-MULT 0-10
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 1-2-20-0 GS-MULT 0-12
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 2-1-20-0 GS-MULT 0-14
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 2-2-00-0 GS-MULT 0-18
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 1-1-20-0 GS-MULT 0-20
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING MASTER LINK
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111


EQU = 2-2-20-0 GS-MULT 0-22
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING SYNC RECEIVING
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111111



END


Anyone with an idea how to fix it?

/Lasse

 

[patcher]

Did you checked if the trunk is okay? Any other alarm like SLIP alarm? Do you have any board can be use for sync other than 1-0-40-00? If trunk is okay, most probably you replace LSU board in LIM 1.

 

[consultwus]

I RFEXI'ed the system which enabled the sync again.


/L