OccamsRazor
IS-IT--Management
I am running Sygate and PcAnywhere 10.5 on a server at a remote location. If I add access rules, I cannot connect to the server, but get proper passthrough to local stations. If there are no access rules, I can pcaw into the server, but not local workstations.
The server is running two NICs, one with a public address and one with a private address. I have tried configuring rules with 5632 on the public nic and 5631 on the local nic, no luck. I have tried 5631 and 5632 on the public and on the local, no luck. I have tried the native pcaw acess rules in sygate under those same configurations, no luck.
Please advise.
The server is running two NICs, one with a public address and one with a private address. I have tried configuring rules with 5632 on the public nic and 5631 on the local nic, no luck. I have tried 5631 and 5632 on the public and on the local, no luck. I have tried the native pcaw acess rules in sygate under those same configurations, no luck.
Please advise.