SX2000 T1: Analog vs Digital

[taylorjr]

Can someone tell me if a SX2000 can support analog or digital T1s? And if so, what type card is needed for each? Thanks.

 

[taylorjr]

I was under the impression that all T1s are digital but a tech in another office when placing an order was asked by provider if they wanted an analog or digital T1. Am I wrong - is there such a thing as a analog T1?

 

[cwc3]

I think what you should be asking is does the 2000
support both T1 and isdn PRI !

 

[taylorjr]

Thanks, cwc3 - I am in the process of trying to find out what specific cards are in the SX2000 - but still, I am under the impression that both T1's and isdn PRI's are digital circuits.

 

[cwc3]

true!

 

[taylorjr]

cwc3 - The switch has a MC342BB E&M TRUNK Card and a MC263AA DSI FORMATTER Card - any suggestions on what type of T1 service to order? Thanks.

 

[cwc3]

do you have the docs for the 2000? are you planing to
do the T1 install yourself?

 

[taylorjr]

Well - I am going to try to remotely support the tech in the office with installing it

 

[cwc3]

also is this a 2000 light?

 

[taylorjr]

Yes sir - SX2000 light

 

[cwc3]

that card is for a (DS1) reading the handbook now

 

[cwc3]

the short answer is that it supports a digital t1
boy I wouldn't attempt a cut like that remotely
is this a mission critical system?

 

[taylorjr]

No - actually this is a new install and is definitely not mission critical. I believe the office has a Norstar 0x32 key system that is very old but is currently working and they want to get this one up and running first before cutting over to it.

 

[cwc3]

any did's on the T!? what type of phones,voicemail
are you going to run ?is this on the east coast?

 

[taylorjr]

I do not believe there will be DIDs on it....the phones are superset 420s with AVT voicemail.