SX2000/SX200 Terminal Emulation 2

[drichter12]

I have done a bit of searching through past posts and have accumulated quite a few commands for use in navigating the telnet interface on the SX-200 and SX-2000 systems but I would like to know if anyone is aware of the ability to do "Page-Up" and "Page-Down" in forms on these systems.

Thanks,

Dale

 

[JimHilton]

Hi, what client are you using? Telnet-tls has a "scroll back" (I've forgotten the key combo).

I have yet to find another client that works with the SX-200 via TLS.

I'd really like it if SecureCRT would support it.

Jim

 

[drichter12]

I'm using ZOC which allows me to do anything but FTP/TFTP and gives my good scripting and keyboard mapping under any terminal emulation. I have re-mapped all the keys I am aware of for the SX-200/SX-2000 but was hoping that there might be a page-up and page-down key sequence which would be handy when I just need to move forward or backward 20 or so lines.


Dale

 

[UncleRalph]

I'll have to take a look at ZOC. But perhaps you can program a keyboard shortcut to enter the following key sequences "^j g d 10" It will send you down 10 lines. To go up the squence is "^j g u 10"
The "^j" is <ctl>+j.

Hope that helps.

Ralph

 

[drichter12]

Thanks UncleRalph! Works like a charm. I used "^J G D 10^M" and "^J G U 10^M" (added ^M for return).


Dale

 

[drichter12]

Just in case others are looking for info on key mapping for the SX-200/SX-2000, here is what I have so far.

Key Send Description

F1 ^[1 CDE Option 1
F2 ^[2 CDE Option 2
F3 ^[3 CDE Option 3
F4 ^[4 CDE Option 4
F5 ^[5 CDE Option 5
F6 ^[6 CDE Option 6
F7 ^[7 CDE Option 7
F8 ^[Q CDE Quit/Cancel
F12 ^JSEA^M CDE Search
INS ^JINS^M CDE Insert
PGUP ^J G U 10^M CDE Page UP
PGDN ^J G D 10^M CDE Page Dwn
SHFT+TAB ^[^I CDE Reverse Tab

Hope this helps..


Dale