Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SX2000 Procomm Scripts
- Thread starter tilf
- Start date
MitelInMyBlood
Technical User
Shouldn't be too difficult to write one..
Just open a CDE session, open the TEL DIR form then start your script adding them. You will need to use some pacing, but not much, about 150 milliseconds between TAB commands
send [name]tab{dept}tab[location]tab[repeat]
Several years ago we "converted" an entire 1500 user database from an old 3 cabinet SG into a 2K Light, including ARS. We didn't use Procomm, but it was something similar (SmarTerm as I recall)
Just open a CDE session, open the TEL DIR form then start your script adding them. You will need to use some pacing, but not much, about 150 milliseconds between TAB commands
send [name]tab{dept}tab[location]tab[repeat]
Several years ago we "converted" an entire 1500 user database from an old 3 cabinet SG into a 2K Light, including ARS. We didn't use Procomm, but it was something similar (SmarTerm as I recall)
- Status
Similar threads
- Locked
- Question