SX2000 connection to Cisco 5300

[111101001101001]

Hi

Ive been given the task of seeing if its possible of connecting the second trunk port on our SX2000 using an xover to our Cisco 5300 which has a 4 port pri card.

The SX2000 is the area that i need the guidence with in terms of the trunk config. If anyone has experience of this setup or configuring the trunk ports that would be excellent

Regards
martin

 

[MitelInMyBlood]

Can we assume you know how to do the System Config work and get the Universal Pri card (or NSU) installed?

You will need to first define a new Digital Link Descriptor
Address for msg cntrl = A
mostly default falues except:
Integrated Digital access = ISDN Node
Qsig = yes <--- purchaseable option, required
B8ZS = yes
Operation Mode = DSX-1
LBO = 0
ESF = NO <---(!)

Use IMAT to set the protocol variant on the card to QSIG (QSIG ISO)(slave)

Good luck.