Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SX2000 - Call out to one number only. 1

Status
Not open for further replies.

tundranugget

Technical User
Sep 4, 2003
98
US
User wants a modem to be restricted to dialing only a single outside number. What is the easiest way to restrict that extension so it can only dial the target number?

SX2000 LW34.
 
Step one -
Assign the modem extension to an unused Class of Restriction (lets say 11).
Put 11 into the Class of Restriction GROUPS that the existing ARS Routes are using.

Now the modem extension is restricted from making all outbound calls.

Step two-
Build a system speed call in the SYSTEM SPEED CALL ASSIGNMENT form. This speed call will be the one number you want to allow. When building the speed call, remember to say YES to OVERRIDES TOLL CONTROL.

Now when the modem dials the speed call index number, it will be able to call out.

_______________________________________________________________

If you did not take enough time to get it right the first time...

What makes you think that you have time to fix it?
 
Or, restrict it completely and the have it dial a speedcall number that overrides Toll Restriction

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
Isn't that what I said? A little more wordy I grant you, but... LOL!

_______________________________________________________________

If you did not take enough time to get it right the first time...

What makes you think that you have time to fix it?
 
Sorry paterson. My bad, I did not completely read your post. I thought you were leading up to designing ARS for a specific COR to allow only 1 number.

So,

Or, you could Design ARS with a Route and COR that only allows 1 number to be dialed.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
Thanks Paterson. Works like a charm.

I finally noticed the point of giving out stars. I wish had had given out one to everyone who helped me in the past, including kwbMitel, MitelInMyBlood and others. Sigh.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top