I am working with a customer site where there is an SX2000 connected to a Dialogic D/120 JCT board. I have a few questions that someone may answer for me. What I am looking for is how too get the Dialogic board to recognize that the Mitel analog set has hung up the call? Some systems send a loop current drop and some (such as Nortel) send a disconnect tone. What does Mitel do? I am still trying to get this site to tell me what kind of hardware they are using. I also know nothing about Mitel (I'm an old Nortel guy) so any response will need to be pretty specific. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SX2000 and Dialogic
- Thread starter Volguy7
- Start date
the SX2000 will return dialtone after a party hangs up. I brlieve that this is what a lot of the integrations use to detect a hangup. Mitel does provide a disconnect on newer cards and software, but most sites do not have that capability.
Simon
Simon
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question