sx200 line cards

[Mountainbear]

I have inherited the job as a Mitel sx200 tech for a mid/large motel and am learning on the fly. They are having an issue with a digital 12 line card (910-010-000), The line card appears fine although it clearly is not since none of the analog or digital phones on that bay slot will work and the red fail light is flashing. They do have a spare six line analog card (910-020-000). Can these cards be interchanged to provide them with at least 6 working phones in the rooms? Or will the analog card cause problems where the digital card was?

 

[augustD2]

You need to configure the card in form1, but you will loose the programation of the digital phone if you put the analog card in the same slot.

Do you have other free slot to insert the card?