SX200 ICP>RAD

[jabbo99]

I've programming a system RAD but the recording I hear when answering a wakeup call is a series of beeps.
System Option 134 is enabled
Rad greeting number 10 is recorded
I've assigned Rad greeting #10 to Rad Set 10 under Greeting 1 in Form 49 RAD setup form
I've set up hunt group 2 as Circular and Recording. I assigned pilot number 550 to it. RAD greeting set is 10..
I've set up a separate COS for the RAD and only enabled COS option 223 per the THB

I set a wake up call for 201. 201 begins ringing at the designated time of day. I pick up the handset and hear a series of rhythmic beeps. It sounds like a heart monitor. I've set up plenty of RADs for wakeup calls but this is the first time I've encountered this problem.

Any suggestions?

Thank you

 

[kwbMitel]

I dont see anything about the form 19 setting

Automatic Wake-up Routing for this Tenant


**********************************************
What's most important is that you realise ... There is no spoon.

 

[jabbo99]

Yes, I have the RAD hunt group pilot number, 550, in the Automatic Wake-up Routing field for my Guest Room Tenant.