sx200 ICP DHCP options problem

[guitartech]

Brand new sx200 ICP AX running ver 5 software.

I made a new DHCP range, and under range options only setup option 3 for router and option 125 for the phones.

I only want the DHCP to be given to the phones, but it still gives out IP addresses to the PC's as well.

I have even deleted the common options and subnet options to stop it but it still gives out DHCP.

What could be wrong? Is it a reboot to fix it after changing programming?

 

[kwbMitel]

the Ip range needs to be named specifically.

id:ipphone.mitel.com

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[guitartech]

The actual range name has to be named id:ipphone.mitel.com??

Thanks kwbmitel, I didn't find that in the docs.

 

[guitartech]

Is it the range that needs to be named properly or the subnet?

Just tried the range and it still does the same thing. I'll keep trying something different but it's driving me crazy.

 

[kwbMitel]

It is the range when used with a 3300. I am assuming the same rules apply to a SX200.

Maybe someone who has done this on a 200 can confirm/deny.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.