sx200 icp 3.1 Gui Interface

[tt1tom]

I see by some other posts people talking about a gui interface for the sx200 icp. How do I get more info on this and how it works.

 

[pandabear1]

took this out of the docs for you hope it helps:

SX-200 ICP Web Interface Connection to the Controller
A web browser can be used to connect to the SX-200 ICP from the LAN and manage the system using the SX-200 Web Interface.
The SX-200 ICP Web Interface provides the following functionality:
• The interface is divided into three panels:
- the left panel contains the CDE/MTCE form menu
- the center panel contains the main CDE/MTCE form interface
- the upper panel contains an information display (alarm status and software version) and buttons to configure user preferences (font settings and contrast mode), display online help, and exit the application
• Users can select forms and softkeys by clicking on them, or by entering shortcut key commands.
• The online help system is context sensitive. When a user clicks the help button, a page displays containing information pertaining to the CDE form or MTCE command currently in use.
Figure: SX-200 ICP Web Interface
Before you begin, configure the management PC to support the connection:
- disable your web browser's pop-up blocker software
- install Sun Java plugin version 1.5 or later
To connect to the controller using the SX-200 Web Interface:
1. Connect the management PC and the controller to the LAN.
2. Launch a web browser (IE 6.x or Mozilla Firefox).
3. Enter

http://<controller

IP or hostname>
For example,

http://192.168.1.2

4. Enter a login name and password to log in to the SX-200 Web Interface. (Default is installer/1000.)

 

[tt1tom]

where did you find this in the docs? is it on the CD that comes with the switch or is it on mitel's website???

 

[pandabear1]

both, on the CD or the ICP docs look under "program cde then equipment used for customer data entry" and there you are.