sx200 AX ICP - System Option #57 changes guest rooms and IP & ONS sets??

[SimpleRhyme]

Hello all,
I am working on an sx200 AX ICP rel 5.0.2.14.

Any idea why my IP phones (COS #1) and ONS phones (COS #2), would change along with guest rooms (COS #14), when I change system option #57 (vacant,reserved rm default call restriction) from INT, LOC or LD?

Strange. Because when I go into the console Function > Guest Room> Room Number, I can enter any IP or ONS extension and change it manually. Didn't think a NON-guest room was able to be entered this way.

Any help would be appreciated.

Thanks!

 

[kwbMitel]

Once you enable Outgoing Call Restriction (System Option 32) then ALL phones are governed by the setting.

Non-Room phones will automatically assume internal only until changed regardless of the settings for Option 56 or 57 (or so I believe)

Turning off option 32 and then turning it back on again will set every device on the system to LD capable

Any phones created prior to activation of option 32 will have LD capability

**********************************************
What's most important is that you realise ... There is no spoon.

 

[SimpleRhyme]

Interesting, I had no idea that non room phones were affected by this setting. When I return to the site I will test your theory on Option 56 or 57.

Thanks so much!