SX-200 ICP FTP

[TechInter]

How to upload file via FTP on to the SX-200 ICP V4.0 ?

i.e. : Upload new spectralink file

Thank's

 

[kwbMitel]

I'm not sure if the process is the same as on a 3300 but it cant hurt to tell you.

On a 3300.

From Command Prompt
Change to directory containing file to upload
ftp {ipaddress)
username
Password

Dir will list all files and directorys

cd tftp

bin
hash
put [filename]

bye



*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.

 

[TechInter]

if I enter the ftp (ipaddress), the command prompt "connexion close by far host"

This is possible to have to enable option on my system ?

 

[kwbMitel]

From Mitel Online:

2. Use a File Transfer Protocol (FTP) application to copy the following SpectraLink files to the sysro\tftp folder on the 3300/200 ICP system. (Overwrite any existing files):
? flashfs
? pd11gl3.bin
? pd11mtd.bin
? pd11mtd3.bin
? pi110001.bin
? slnk_cfg.cfg
? SVP100.toc
? zvmlinux
3. Reset the SpectraLink NetLink Wireless telephones (power off/on). The new software will automatically download to the handset.


*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.

 

[TechInter]

Yes, me also I had found the release note and was to it my question how to put the files !!

I spoke with a good friend at Mitel and finally there is error in the release note, the FTP in the 200 ICP is not supported!! So, it's necessary to await next release to have the new firmware of spectralink handset.

Bye

 

[kwbMitel]

WOW, nasty.

Thanks for taking the bullet.

*******************************************************
If we don't take care of the customer, Maybe they'll stop bugging us.