SX-200 ICP Flash vs. Harddrive

[kwbMitel]

Is there a maintenance command that will tell you whether the SX-200 ICP has an internal hard drive or not?

If running on a Flash Card, can it tell you the size?

**********************************************
What's most important is that you realise ... There is no spoon.

 

[nytalkin]

Look at the bootline; it will tell you if its running on internal or external flash or harddrive. “ata=auto” means that the system will try to boot from the front
flash card first. “ata=no auto” means that the system will bypass the front flash card and
boot from the internal flash card or hard drive only.

NO GOOD DEED GOES UNPUNISHED!

 

[kwbMitel]

Got that, but without taking the cover off, how do you tell if its got a harddrive and if not, how big the internal falsh is?

**********************************************
What's most important is that you realise ... There is no spoon.

 

[nytalkin]

I don't have access to a system right now but I think you can see the status of a flash card from the SYSTEM IDENTITY in maintenance. If theres are hard drive it will show its status as well.

NO GOOD DEED GOES UNPUNISHED!

 

[kwbMitel]

Ditto on the no access. As it turns out, I just finished the upgrade and the System Identity was the first thing I checked.

It told me very clearly I had a 256Mg Flash internal.

Thanks anyway.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[JimHilton]

Heya K, not sure if this will help but i found some dusty dox on vxworks and this is what it said:

version Print VxWorks version info, and boot
line

The link to the guide is here:

http://members.cox.net/winr/Mitel/mitel.pdf