Here is the situation, there are two networks 131.221.19.0 and 131.221.20.0 with 24 bit mask. Both networks are connected by Cat4000. On a network there are 7 Cisco2948 switches and PCs all of them are connected to CAT4000 Gig interfaces. All PC's are connecte to a switches without any subnet order so on one switch you can have PC's that belong to different subnets. OV creates a star segment with a switch in the middle and connecting only devices that belong to the same network as a switch. Is there a way to show all devices connected to a switch no matter what network they belong to?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Switches and Subnets
- Thread starter egb0
- Start date
Similar threads
- Locked
- Question